Skip to main content

Sequencer

The Sequencer and Censorship Resistance

The Sequencer is a specially designated Arbitrum full node which, under normal conditions, is responsible for submitting users’ transactions onto L1. In principle, a chain’s Sequencer can take different forms; as Arbitrum One currently stands, the Sequencer is a single, centralized entity; eventually, sequencing affordances could be given to a distributed committee of sequencers which come to consensus on ordering. However, regardless of its form, the Sequencer has a fundamental limitation that doesn’t apply to any other part of the system: it must operate under its own security assumptions; i.e., it can’t, in principle, derive security directly from layer 1. This brings up the question of how Arbitrum Rollup maintains its claim to censorship resistance when-and-if the Sequencer misbehaves.

Here we will describe the mechanics of how the Sequencer typically operates, and how any user can bypass the Sequencer entirely to submit any Arbitrum transaction (including one that, say, initiates an L2 to L1 message to withdraw funds) directly from layer 1. Thus mechanism thereby preserves censorship resistance even if the Sequencer is being completely unresponsive or even malicious.

Clients interact with the Sequencer in exactly the same way they would interact with any full node, for example by giving their wallet software a network URL that happens to point to the Sequencer.

Currently, on the Arbitrum One and Arbitrum Nova chains, the Sequencer is run by Offchain Labs.

The Core Inbox

When we talk about “submitting a transaction into an Arbitrum chain,” we’re talking about getting it included into the chain’s core Inbox, represented by the sequencerInboxAccs byte array in Bridge. Once transactions are included in the core Inbox, their ordering is fixed, execution is fully deterministic, and we can trustlessly treat the resultant state as having L1-level finality (see “Transaction Lifecycle”). The Sequencer’s role (or lack thereof) concerns strictly what happens prior; i.e., how a transaction makes its way into the core Inbox. We’ll break down the possible routes a transaction can take into two scenarios: a well-behaved Sequencer, and a faulty Sequencer.

Bridging

We have already covered how users interact with L2 contracts--they submit transactions by putting messages into the chain’s inbox, or having a full node Sequencer or aggregator do so on their behalf. Let’s talk about how contracts interact between L1 and L2--how an L1 contract calls an L2 contract, and vice versa.

The L1 and L2 chains run asynchronously from each other, so it is not possible to make a cross-chain call that produces a result within the same transaction as the caller. Instead, cross-chain calls must be asynchronous, meaning that the caller submits the call at some point in time, and the call runs later. As a consequence, a cross-chain contract-to-contract call can never produce a result that is available to the calling contract (except for acknowledgement that the call was successfully submitted for later execution).

L1 contracts can submit L2 transactions

An L1 contract can submit an L2 transaction, just like a user would, by calling the Nitro chain's inbox contract on Ethereum. This L2 transaction will run later, producing results that will not be available to the L1 caller. The transaction will execute at L2, but the L1 caller won’t be able to see any results from the L2 transaction.

The advantage of this method is that it is simple and has relatively low latency. The disadvantage, compared to the other method we’ll describe soon, is that the L2 transaction might revert if the L1 caller doesn’t get the L2 gas price and max gas amount right. Because the L1 caller can’t see the result of its L2 transaction, it can’t be absolutely sure that its L2 transaction will succeed.

This would introduce a serious a problem for certain types of L1 to L2 interactions. Consider a transaction that includes depositing a token on L1 to be made available at some address on L2. If the L1 side succeeds, but the L2 side reverts, you've just sent some tokens to the L1 inbox contract that are unrecoverable on either L2 or L1. Not good.

L1 to L2 ticket-based transactions

Fortunately, we have another method for L1 to L2 calls, which is more robust against gas-related failures, that uses a ticket-based system. The idea is that an L1 contract can submit a “retryable” transaction. The Nitro chain will try to run that transaction. If the transaction succeeds, nothing else needs to happen. But if the transaction fails, Nitro will create a “ticketID” that identifies that failed transaction. Later, anyone can call a special pre-compiled contract at L2, providing the ticketID, to try redeeming the ticket and re-executing the transaction.

When saving a transaction for retry, Nitro records the sender’s address, destination address, callvalue, and calldata. All of this is saved, and the callvalue is deducted from the sender’s account and (logically) attached to the saved transaction.

If the redemption succeeds, the transaction is done, a receipt is issued for it, and the ticketID is canceled and can’t be used again. If the redemption fails, for example because the packaged transaction fails, the redemption reports failure and the ticketID remains available for redemption.

Normally the original submitter will try to cause their transaction to succeed immediately, so it never needs to be recorded or retried. As an example, our "token deposit" use case above should, in the happy, common case, still only require a single signature from the user. If this initial execution fails, the ticketID will still exist as a backstop which others can redeem later.

Submitting a transaction in this way carries a price in ETH which the submitter must pay, which varies based on the calldata size of the transaction. Once submitted, the ticket is valid for about a week. If the ticket has not been redeemed in that period, it is deleted.

When the ticket is redeemed, the pre-packaged transaction runs with sender and origin equal to the original submitter, and with the destination, callvalue, and calldata the submitter provided at the time of submission.

This mechanism is a bit more cumbersome than ordinary L1 to L2 transactions, but it has the advantage that the submission cost is predictable and the ticket will always be available for redemption if the submission cost is paid. As long as there is some user who is willing to redeem the ticket, the L2 transaction will eventually be able to execute and will not be silently dropped.

L2 to L1 ticket-based calls

Calls from L2 to L1 operate in a similar way, with a ticket-based system. An L2 contract can call a method of the precompiled ArbSys contract, to send a transaction to L1. When the execution of the L2 transaction containing the submission is confirmed at L1 (some days later), a ticket is created in the L1 outbox contract. That ticket can be triggered by anyone who calls a certain L1 outbox method and submits the ticketID. The ticket is only marked as redeemed if the L1 transaction does not revert.

These L2-to-L1 tickets have unlimited lifetime, until they’re successfully redeemed. No rent is required, as the tickets (actually a Merkle hash of the tickets) are recorded in Ethereum storage, which does not require rent. (The cost of allocating storage for the ticket Merkle roots is covered by L2 transaction fees.)

Happy/Common Case: Sequencer Is Live and Well-behaved

Here, we start by assuming that the Sequencer is fully operational, and is running with the intent of processing users’ transactions in as safe and timely a manner as possible. The Sequencer can receive a user’s transaction two ways — either directly via an RPC request, or via the underlying L1.

If a user is posting a “standard” Arbitrum transaction (i.e., interacting with an L2 native dapp), the user will submit the signed transaction directly to the Sequencer, much like how a user submits a transaction to an Ethereum node when interacting with L1. Upon receiving it, the Sequencer will execute it and nearly instantaneously deliver the user a receipt. Some short time later — usually no more than a few minutes — the Sequencer will include the user’s transaction in a batch and post it on L1 by calling one of the SequencerInbox’s addSequencerL2Batch methods. Note that only the Sequencer has the authority to call these methods; this assurance that no other party can include a message directly is, in fact, the very thing that gives the Sequencer the unique ability to provide instant, "soft-confirmation" receipts. Once posted in a batch, the transactions have L1-level finality.

Alternatively, a user can submit their L2 message to the Sequencer by posting it on the underlying L1. This path is necessary if the user wishes to perform some L1 operation along with the L2 message and to preserve atomicity between the two — the textbook example here being a token deposit via a bridge (escrow on L1, mint on L2). The user does this by publishing an L1 transaction (i.e., sending a normal transaction to an L1 node) that calls one of the relevant methods on the Inbox contract; i.e., sendUnsignedTransaction. This adds a message onto what we’ll call “the delayed Inbox”, (represented by the delayedInboxAccs in the Bridge contract), which is effectively a queue that messages wait in before being moved over to the core Inbox. The Sequencer will emit an L2 receipt about ~10 minutes after the transaction has been included in the delayed Inbox (the reason for this delay is to minimize the risk of short term L1 reorgs which could in turn cause an L2 reorg and invalidate the Sequencer’s L2 receipts.) Again, the last step is for the Sequencer to include the L2 message in a batch — when calling the batch submission methods, the Sequencer specifies how many messages in the delayed inbox to include — finalizing the transaction.

In sum — in either happy case, the user first delivers their message to the Sequencer, who in turn ensures that it arrives in the core Inbox.

Unhappy/Uncommon Case: Sequencer Isn’t Doing Its Job

Now let’s suppose the Sequencer, for whatever reason, is entirely failing to carry out its task of submitting messages. A user can still get their transaction included in two steps:

First, they submit their L2 message via L1 into the delayed Inbox as described above: note that although atomic cross-chain messages are the common case for using the delayed Inbox, it can in principle be used to submit any L2 message.

Once in the delayed Inbox, we obviously can’t rely on the Sequencer to include the transaction in a batch. Instead, we can use SequencerInbox’s forceInclusion method. Once a message has been in the delayed Inbox for a sufficient amount of time, forceInclusion can be called to move it from the delayed Inbox into the core Inbox, at which point it’s finalized. Crucially, any account can call forceInclusion.

Currently, on Arbitrum One, this delay time between submission and force inclusion is roughly 24 hours, as specified by maxTimeVariation.delayBlocks / maxTimeVariation.delaySeconds. A force inclusion from L1 would directly affect the state for any unconfirmed L2 transactions; keeping conservatively high delay value ensures it should only be used under extraordinary circumstances.

On top of the delay itself, the forceInclusion path has the downside of uncertainty around transaction ordering; i.e., while waiting for a message's max delay to pass, a malicious Sequencer could, in principle, directly post messages in front of it. However, there’s ultimately nothing the Sequencer can do to stop it from being included in the core Inbox, at which point its ordering is finalized.

While the slow, “unhappy” path isn’t optimal, and should rarely, if ever, be necessary, its availability as an option ensures Arbitrum Rollup always preserves its trustless security model, even if the permissioned parts of the system act faulty.

How the Sequencer Publishes the Sequence

So how do nodes get the sequence? The Sequencer publishes it in two ways: a real-time feed, and batches posted on L1 Ethereum.

The real-time feed is published by the Sequencer so that anyone who subscribes to the feed receives instant notifications of each transaction as it is sequenced. Nitro nodes can subscribe to the feed directly from the Sequencer, or through a relay that forwards the feed. The feed represents the Sequencer's promise that it will record transactions in a particular order. If the Sequencer is honest and doesn't have a long downtime, this promise will be kept. So anyone who trusts the Sequencer to keep its promises can rely on the feed to get instant information about the transaction sequence--and they can run the sequenced transactions through the state transition function to learn the results of each transaction immediately. This is "soft finality" for transactions; it's "soft" because it depends on the Sequencer keeping its promises.

The Sequencer also publishes its sequence on the L1 Ethereum chain. Periodically--perhaps every few minutes in production--the Sequencer concatenates the next group of transactions in the feed, compresses them for efficiency, and posts the result as calldata on Ethereum. This is the final and official record of the transaction sequence. As soon as this Ethereum transaction has finality on Ethereum, the Layer 2 Nitro transactions it records will have finality. These transactions are final because their position in the sequence has finality, and the outcome of the transactions is deterministic and knowable to any party. This is "hard finality".

The Sequencer's batches are compressed using a general-purpose data compression algorithm called "brotli", on its highest-compression setting.